NdFeB Rare Earth Magnet  
     
  Permanent - Ferrite Magnet  
     
  Plastic & Rubber Magnet  
     
  Alnico  
     
  SmCo  
     
       
     
 
Plastic & rubber magnets are made of bonded ferrite magnet powder, compound rubber and other materials. By extruding, rolling or injecting, the combination can be made into soft, plastic and flexible magnets with different shapes such as strip, coil, sheet, and other complicated shapes. They are widely used in micro motor, fridge, disinfecting cupboard, toy, stationery, ad, etc.
    
       
       
 
1. ISO Rolled Material: Gs-7
Typical Magnetic Property Value
Physical Characteristics
Br (Gs)
Hcb (Oe)
Hci (Oe)
(BH)max (MGOe)
Density (g/cm3)

Hardness (Hc(a))
Tensile Strength (kg/cm2)
Break Extension (%)
Flexibility
2000
1400
2000
0.85
3.7±0.2
95±5
50~100
100~300
No cracks after winding on a barФ20 for 3 circles
   
       
 
2. ISO Extruded Material: Gs-10
Typical Magnetic Property Value
Physical Characteristics
Br (Gs)
Hcb (Oe)
Hci (Oe)
(BH)max (MGOe)
Density (g/cm3)

Hardness (Hc(a))
Tensile Strength (kg/cm2)
Break Extension (%)
Flexibility
1850
1500
2100
0.75
3.7±0.2
95±5
50~100
100~300
No cracks after winding on a barФ20 for 3 circles
   
       
 
3. Semi-Aniso Rolled Material: Gs-10
Typical Magnetic Property Value
Physical Characteristics
Br (Gs)
Hcb (Oe)
Hci (Oe)
(BH)max (MGOe)
Density (g/cm3)

Hardness (Hc(a))
Tensile Strength (kg/cm2)
Break Extension (%)
Flexibility
2300
1600
2100
1.15
3.7±0.2
95±5
50~100
100~300
No cracks after winding on a barФ20 for 3 circles
   
       
 
4. Aniso Extruded Material: Gs-12BH-1
Typical Magnetic Property Value
Physical Characteristics
Br (Gs)
Hcb (Oe)
Hci (Oe)
(BH)max (MGOe)
Density (g/cm3)

Hardness (Hc(a))
Tensile Strength (kg/cm2)
Break Extension (%)
Flexibility
2250
1600
2300
1.10
3.7±0.2
95±5
50~100
100~300
No cracks after winding on a barФ20 for 3 circles
   
       
 
5. Aniso Rolled Material: Gs-12BH-1
Typical Magnetic Property Value
Physical Characteristics
Br (Gs)
Hcb (Oe)
Hci (Oe)
(BH)max (MGOe)
Density (g/cm3)

Hardness (Hc(a))
Tensile Strength (kg/cm2)
Break Extension (%)
Flexibility
2600
2200
3200
1.60
3.7±0.2
95±5
50~100
100~300
No cracks after winding on a barФ20 for 3 circles
   
       
 
   
       
       
 
  ONE MAGNET ELECTRONIC (M) SDN BHD (587602-U)  
  Address
21 - G , Jalan 3/10, Pandan Jaya,
55100 Kuala Lumpur,
Malaysia.		 Tel
+603 - 9284 9463 (Mr. K.F Wong)		 H/P
+6012 - 679 8662		 Fax
+603 - 9282 3914
 Email
kfwong@onemagnet.com.my		  
 
Copyright © 2008 One Magnet Electronic (M) Sdn Bhd. All Rights Reserved.